Frankenstein Guitar Amplifier Build

I'm moving from the country to the city soon, and have been making a steady attempt to consolidate and downsize beforehand.




I've had several dead and dying guitar amplifiers in my workshop for quite some time, and I had ruminated enough on how I was going to hack them all together into something unique. So, check out the pic and video of it below, and be sure to read the
instructable for some more detail about how this was all done.







Frankenstein Guitar Amp Build - More DIY How To Projects

Scrapwood Shelving for Knick-Knacks and Tchotchkes

My wife, Melody and I have been hard at work all this week in preparation for the Cold Spring River Festival. Melody designs and sews some awesome and hilarious apparel, and I'll be selling all different sorts of things made from recycled and repurposed materials.


It doesn't take me a lot of time to accumulate all sorts of scrap lumber from different projects, and I can't bear to see it go to waste, so I designed and built these shelf units that are perfect for keeping your odds and ends and action figures and bric-a-brac that you don't know what to do with.


I tried to make everything look a bit less hacked together by filling in the gaps (with homemade wood filler made from screened sawdust and wood glue) with a putty knife, shaping it with the jigsaw, and sanding everything down.


I've got some other tricks up my sleeve for our table at the festival, but I really do hope a couple of these pieces sell.

Evaporative Cooler Update!

Methinks the evaporative cooling set-up did it's job just fine! Between 11:00 to 1:20 the inside temperature creeped from 85 F to 90 F and has held steady since then (writing this at 3:30). I'm calling this a not-too-shabby success, since the outdoor temperature climbed from 91 to 97 in the same amount of time.

So I didn't quite reach the wet-bulb temperature of 84, but here I am writing this entry - a bit balmy, but if it were 97 indoors I'd probably have passed out before finishing this paragraph :)


Lots of thanks to Make: Magazine for featuring this project!

DIY Evaporative Cooling in a Heat Wave

At home, we only have A/C units on the second floor, and I do most of my work on the Mac, which is on the first floor. Yesterday the New York metro area wasn't just hot, it was Africa Hot, and today looks to be more of the same, but I've got work to do. This morning I lowered all the blinds in an attempt to keep the heat out, and set up the window fans on tables with shallow baking pans full of water in front of them. The idea is that the air flowing from the fans will evaporate the water and cool down the room.


WARNING: SCIENCE CONTENT BELOW

How much you can cool a room using this method is dependent on the relative humidity on that particular day. The less relative humidity, the more water you can cool the room down. I found a quick and dirty formula for calculating the "Wet Bulb" temperature, which is the lowest possible temperature you can attain by evaporation alone given the current atmospheric conditions. It turns out that today's wet bulb temperature is 84 degrees, which will feel around 80 for me with the fans going - a bit hot, but definitely tolerable. The thermostats on the fans are holding at 85 right now. However, we haven't reached the hottest part of the day yet - I'll update later this afternoon to see how the experiment worked out.

The Tapescape Audio Robot

Keeping in the spirit of this blog, I should mention that I'm the co-creator of a robot that was built almost solely from a dual tape deck and could transmit sound from a "scape" of "tape" as it rolled along. This was called TapeScape -

After moving out of NYC after my tenure as bassist for Kinetic was over, this was the first major "maker" project I undertook with my collaborator, Ilan Schifter (who encouraged me to enroll at NYU's ITP program.) We originally entered the robot into an Instructables contest, and then received attention from several well-known blogs.

It was after this that the gears started turning for this website idea. It excites me immensely to know that there is "obsolete" technology and materials languishing, just waiting for others like myself to snatch it up and re-imagine it as something fantastic!

If you have ideas along these lines, I'd love to hear what you've been doing. If you have something laying around and don't know what to do with it, let me know, and we can think of something. Cheers!

Recycling Plastic Bags into Childrens' Blocks

I learned about the method of "stewing" plastic bags from this instructable a while back, and decided to try it for myself.  In short, it's done by placing the bags in canola oil, in which they acquire a gummy consistency, suitable for molding into rigid pieces. I decided to make some childrens' blocks out of it. As far as I know the plastic is all #2 HDPE which I assume is safe for children. Can anyone shed some light on this? (don't worry I wouldn't give this to kids until I'm absolutely sure).

The swirly, marbled patterns have potential, although just mixing all the different colors together make it ugly as sin. Perhaps in the future I'll use various color schemes and they'll come out nicer.

On further thought, what basically gets created from this process is plastic lumber . Perhaps I can hang onto all my #2 plastic and slowly make enough plastic bricks to build a house. :) or even better, raid the bins on recycling day and live within other peoples' waste. Oh the possibilities....

Check out build pics at my flickr page.

Thinking Inside the Box

     I'm a pretty decent wood butcher - have slapped together a compost bin, workbench, shelves, even an adirondack chair made of shipping pallets. But what I've never tried to do is a carpentry project that fits edges together snugly, where everything is perfectly square, and it looks somewhat decent (like a wood surgeon would do it?)
     So, after feeling restless and watching this video, in which Adam Savage claims to start going a bit nuts if he isn't regularly building something, I made it an afternoon project to construct a simple, clean, elegant wooden box.
    I must give infinite respect to my friends who are carpenters. It is an art that takes a lot of practice to do well. I feel like my box will hold up for a while, but it ain't the prettiest, nor the straightest thing in the world. All the same, I learned a bit while making it, so it's all good.